Formed roof curbs strapped on pallets

ROOFTOP EQUIPMENT & CHANGEOUTS

Roof Curbs & Custom Curb Adapters in Scottsdale

Make the new unit fit the roof you have.

Order roof curbs, custom curb adapters and equipment supports for new installs and rooftop changeouts. Legacy Metal Products helps contractors match the equipment, roof and duct openings before parts go to the field.

Roof curbs staged for delivery, from the Empire portfolio.

  • New installs & changeouts
  • Flat, pitched & specialty curbs
  • Scottsdale pickup · Valley delivery

WHAT WE BUILD

Start with what’s on the roof and what’s going back on it.

Legacy is the Scottsdale team powered by Empire Metal Products. A replacement rooftop unit may not match the curb, supply opening or return opening already in place. Send the existing conditions and new equipment data up front so the quote covers the right piece, not just a curb of roughly the right size.

New construction & equipment installs

For a new roof curb, share the equipment submittal, curb height, roof construction and finished opening layout. Mark which side is supply and which is return.

View products

Rooftop equipment changeouts

Compare the old curb and new unit before deciding whether an adapter is the right fit. Include actual curb dimensions, both model numbers and photos rather than relying on the old unit nameplate alone.

View products

Pitched or corrugated roofs

Give us the roof profile, rise and run or pitch, which way the roof slopes, and equipment orientation. A marked sketch makes clear which edge is high and where the openings need to land.

View products

Fan and specialty supports

Send the fan or equipment cut sheet and any job-specific isolation or seismic requirements for review. If there is an engineered detail, include it with the quote request.

View products

REQUEST A QUOTE

Send the model numbers and curb measurements.

Send your drawings and photos to the Scottsdale team, or call to talk through the job.

  • Existing and replacement unit model numbers or equipment submittals
  • Existing curb outside dimensions and supply and return opening locations
  • Roof type, pitch, slope direction, curb height and any special project requirements
Sheet metal changeout adapters with divided openings and blue protective covering.
Equipment changeout adapters · Empire fabrication portfolio

PROJECT SPOTLIGHT

One adapter, two layouts to get right.

These changeout adapters show why the base footprint alone isn’t enough. The adapter has to meet the existing curb below and the replacement equipment above, with separate paths for supply and return.

What to verify
Use the same reference corner for both layouts. Mark clear openings separately from outside curb dimensions.
What to send
Include the replacement unit submittal and photos of what is installed. Flag field dimensions you still need to confirm.

REAL WORK

Curbs and adapters in the shop and ready to ship.

Examples from the Legacy and Empire fabrication portfolio.

Equipment adapter frames with internal dividers, raised openings and perimeter flanges.
Custom equipment adaptersFormed assemblies for rooftop equipment connections.
A roof curb being welded at the bench, with the open frame supported during assembly.
Curb fabricationA roof curb being welded at the bench.
Adjustable roof curbs grouped on pallets, showing the formed sides and upper mounting edges.
Adjustable roof curbsAdjustable curb examples showing the frames and formed sides.
View more project photos

WORKING WITH LEGACY

Know what to send, what to verify and how to get it to the job.

Identify the equipment

Send the new equipment submittal and the existing unit model if known. Note whether it’s a new install, changeout or specialty support.

Measure the curb you’re keeping

Record outside length and width, curb height and the size and location of the supply and return openings. Mark orientation consistently across photos and sketches.

Plan around the roof work

Tell us your requested date, whether equipment is already ordered, and whether you need Scottsdale pickup or delivery. Flag any crane or access timing that affects handoff.

SCOTTSDALE PICKUP

Talk to the team handling your quote.

Legacy is powered by Empire Metal Products. Start with the Scottsdale team for scope, pricing and pickup or delivery arrangements.

15855 N Greenway-Hayden Loop #195, Scottsdale, AZ 85260

480-716-6266Pickup & delivery details →

GOOD TO KNOW

Common questions

Can I reuse the existing curb?

It depends on the existing curb, replacement unit and opening layout. Send photos and field dimensions, and let us know what has to stay in place.

What if the roof is pitched?

Mark the pitch and slope direction on a sketch. Include the curb height and equipment orientation so we can review the layout.

Is the existing curb model number enough?

It helps, but field dimensions and photos reduce guessing, especially if the curb or duct openings were changed on site.

What photos help on a changeout?

Send the equipment nameplate, overall curb, opening layout and a view showing orientation. A tape measure in the photo helps when it’s practical to include one.

Can you quote a curb for a nonstandard roof?

Send the roof profile, pitch and slope direction. If the roof or equipment requires a particular detail, include that with the equipment submittal.

Can the curb or adapter be delivered to the job?

Provide the site address, requested date and delivery access. Legacy will confirm arrangements for the order.

TALK WITH LEGACY

Have a job in mind?