Identify the installation orientation
Start with the equipment make, complete model number and intended orientation. The same general type of equipment can be used in different arrangements, while the required connection changes with the installation.
For the forms on this site, choose the attic/horizontal or closet/upflow arrangement that matches the job. Check the specific equipment instructions for permitted orientations and required accessories. The form organizes the sheet metal details; it does not establish which equipment arrangement is allowed.
Measure the openings, not only the cabinet
Record the supply and return opening dimensions separately from the overall equipment case. Show where the openings sit relative to the case edges and identify the equipment side of the connection.
If an existing plenum is being replaced, send the dimensions of the existing duct connection too. The equipment opening and the duct opening may be different sizes or may not share a centerline.
Use a plenum and transition description that explains the shape
A plenum is a chamber connecting an equipment opening to the duct system. A transition changes the connection size or shape. A required piece can combine those functions, so describe the openings and available length instead of relying on the name alone.
Show any offset in a second view. If a rectangular opening changes to round, include the round diameter and the collar position relative to the rectangular face.
Preserve access for service and filters
Mark the service-panel side and the direction a filter is removed. Show nearby walls, framing and piping that limit access. A connection should be discussed in the context of the space needed to use and service the equipment.
Use the clearance requirements from the specific equipment instructions. Do not copy a clearance from a different model or assume a photo demonstrates an acceptable installation.

Coordinate supports and drainage separately
Include any required runners, sleds, stands or filter bases on the sketch. State their dimensions and positions relative to the air-handler footprint. A support piece can affect the available connection height and the space below the equipment.
Also show drain-pan and piping space where it affects the layout. Orientation-specific drainage components and installation requirements come from the equipment documentation; they should be resolved alongside the sheet metal connections.
Send a complete picture of the connection
Mark proposed dimensions separately from verified field measurements. With that distinction, the team can identify what is ready to quote and what still needs to be checked at the installation.
- Equipment make, model, orientation and the applicable equipment drawing.
- Supply and return openings, duct connection sizes and the available connection length.
- Any offset, support arrangement, filter path and service-panel location.
- Wide and close photographs, plus measured limits around framing, walls and piping.

